# Creating a custom phrase
You can create a custom phrase in two ways:
* on the **{Fraze}** tab or
* directly while working with a safety data sheet.
## How to create a phrase on the Phrases tab
1. Open the **{Fraze}** tab.
2. Click **{SBLNovy}**.
3. The new phrase editor opens.
4. In the **{Oddil}** field, select the part of the safety data sheet where you want to use the phrase. If you want to use the phrase universally, leave the field blank.
5. Enter the phrase text in the field for the relevant language.
6. You can also add translations into other languages.
7. Click **{SBLUlozit}** or **{SBLUlozitZavrit}**.
Details about the individual fields can be found in the **Phrase editor** chapter.
## How to create a phrase from a safety data sheet
When you enter text in a section that is not included in the default phrases, SBLCore underlines it in blue. At the same time, the ***{ModryNeniVeFrazich2}*** notification appears above the field on the right.
You can save this text directly as a new phrase.
**Procedure:**
1. In the relevant field in the safety data sheet editor, enter the text you want to save.
2. Right-click in the field or open the drop-down menu 
to the left above the text field.
3. Select **{PridatDoFrazi}.**
4. The phrase editor opens. SBLCore automatically fills in the relevant section and the text from the field.
5. If the field contains more text, delete everything except the phrase you want to save.
6. Check the information in the editor and add translations if necessary.
7. Click **{SBLUlozit}** or **{SBLUlozitZavrit}.**
Details about the individual fields can be found in the following chapter.
## Phrase editor
In the editor, you specify where and how the phrase should be used and enter its text, including translations.
**{Oddil}**
Select the part of the safety data sheet where you want to use the phrase. If you want to use the phrase universally, leave the field blank.
**{Zdroj} and {Key}**
The software automatically fills in the **{Zdroj}** field with the company name and adds the phrase code to the **{Key}** field. You do not need to edit these fields.
**{Stav}**
The software automatically sets the status to **{Published}**. If the phrase is not yet final, you can select a different status, for example **{Published}**.
**{TypFraze}**
For a custom phrase, the software automatically sets the type to **{PhraseTypeUser}**.
**{Stat}**
You can specify the country for which the phrase should be used. This is useful, for example, for information about poison centres, which differs from country to country.
**{Poznamka}**
You can add a note to the phrase for easier reference. You will only see it in the software; it will not appear in the resulting documents.
**{SlovnikAutomatickyText}**
You can set the conditions under which the software automatically adds the phrase to the safety data sheet. Details can be found in the next chapter **Rules for automatic use of a phrase**.
**Fields for individual languages**
For each language, you can enter your own wording of the phrase in a separate field.
When creating a new phrase, we recommend adding translations into all the languages you need straight away. However, you can also add them later.
Enter each phrase as **one separate sentence ending with a full stop.** If you enter multiple sentences, SDS translation may not work correctly.
### Rules for automatic use of a phrase
In SBLCore, you can set conditions according to which the **{SlovnikAutomatickyText}** function automatically fills in selected phrases. You can use a single condition or combine several conditions into a more complex rule.
You can set the following conditions:
**{TextZKlasifikace}**
In any field of the safety data sheet, you can set the text of an H statement to be displayed automatically according to the resulting product classification.
::: Info
*For example, in **section 4.3b {BLDalsiUdaje}**, you can create a phrase and insert the item **{SlovnikAutomatickyText} – {BL_11_1_1_1a}** into it. If the product is classified as acutely toxic (e.g. H302), the relevant classification text is automatically displayed in the selected field. For H302, the text **Harmful if swallowed.** is displayed.*
:::
**{PodminkySplneny}**
Here you can set the conditions that the product must meet for the system to automatically insert the phrase into the safety data sheet.
After opening the menu, you can select one or more conditions, such as physical state, product type or use.
**{PodminkyNesplneny}**
Here you can set the conditions that the product must not meet for the system to automatically insert the phrase into the safety data sheet.
After opening the menu, select one or more conditions. You can choose from the same options as in the previous point.
::: Warning
***Important!** For points 2 and 3, the following applies: if you select multiple conditions, the product must meet all selected conditions.*
:::
**{FrazeNekombinovat}**
In this field, enter the **phrase key** that SBLCore must not insert into the same section as the current phrase.
If SBLCore were to insert both phrases into the same section, it inserts only one of them based on the selected conditions, priorities, and order.
If you want to exclude combinations with multiple phrases, enter their **keys separated by commas without spaces**.
**{NahraditFrazi}**
In the field, enter the **key of the phrase you want to replace.**
If the section contains this phrase, SBLCore replaces it with the current phrase the next time the rules are evaluated.
You can use this setting, for example, when you want to replace a general wording with a more precise phrase based on the properties of a specific product.
If you want to replace multiple phrases at once, enter their **keys separated by commas without spaces**.
**{Priorita}**
**{Priorita}** determines which phrase takes precedence when a section is filled in automatically.
The following rules apply:
**{Priorita} 0** – the phrase is filled in if no other phrase with priority 1, 2, 3, 4, 5… is available.
**{Priorita} 1** – highest priority. The phrase takes precedence over phrases with priority 0, 2, 3, 4, 5…
**{Priorita} 2** – the phrase takes precedence over phrases with priority 0, 3, 4, 5…
**{Priorita} 3** – the phrase takes precedence over phrases with priority 0, 4, 5…
**{Poradi}**
The **{Poradi}** field determines the order of phrases with the same priority in the safety data sheet.
For example, if five phrases have priority 1, you can set their order from 1 to 5.
*For example: 1. Wash your hands. 2. Dry your hands with a towel.*
**{SlovnikKlasifikovano}**
Here you can select one or more **H statements**.
If the product has at least one of the selected H statements, SBLCore automatically inserts the phrase into the relevant section of the safety data sheet.
**{SlovnikKlasifikovanoEUH}**
Here you can select one or more **EUH statements.**
If the product has at least one of the selected EUH statements, SBLCore automatically inserts the phrase into the relevant section of the safety data sheet.
::: Warning
***Important!** For points 8 and 9, it is sufficient for the product to have **at least one of the selected statements.***
:::
**{SlovnikNeklasifikovano}**
Select the **H statements** for which the phrase should not be used.
If the product contains any of the selected H statements, SBLCore does not insert the phrase.
**{SlovnikNeklasifikovanoEUH}**
You can set **EUH statements** in the same way.
If the product contains any of the selected EUH statements, SBLCore does not insert the phrase.
**{Latky}**
SBLCore can also insert the phrase automatically based on whether the product contains a specific substance.
You can enter the substance using one of the identifiers, for example:
* {BL01CisloCAS},
* {BL_O1ES},
* {BL_O1IndexoveCislo}.
If the product contains the selected substance, SBLCore inserts the relevant phrase into the safety data sheet.
You can also set the minimum concentration of the substance from which the phrase should be inserted.